What you need to know about keeping you and your building safe
As we all socially distance and stay home amid the COVID-19 pandemic, some may be asking themselves what else can they do to ‘flatten the curve.’ While hand-washing and staying home remain the most effective means of limiting the spread of the virus, there is conflicting information surfacing about the role and efficacy of air-filters.
“It is important for people to understand how air-filtration systems are supposed to work,” says Jeffrey Siegel, a professor in the Department of Civil & Mineral Engineering at the University of Toronto and an expert in indoor air quality. “Some may be frightened with the situation we are all facing right now, but the best way to protect ourselves, our families, and our communities is with evidence-based information.”
Frequently asked questions
Can building air filtration protect me from getting COVID-19?
Filtration in building heating, ventilation, and air conditioning (HVAC) systems can be a part of an overall risk mitigation approach but is not generally regarded as a solution by itself. There is no direct scientific evidence of benefit, but some reduced exposure can reasonably be inferred based on the ability of some filters to remove particles that contain a SARS-CoV-2 virus. In order for filters to have any impact on infectious disease transmission, transmission has to occur through the airborne route, filters have to be properly installed and maintained in appropriate systems to treat recirculated air, and filters have to be appropriately designed for the building in which they are used. More importantly, in most buildings and in most situations, filters may be considerably less effective than other infection control measures including social distancing, isolation of known cases, and hand-washing.
What filter should I use to protect those in my building from COVID-19?
There is no obvious answer to this question, given unknowns about the nature of SARS-CoV-2 containing particles and droplets, as well as the broader issues raised above. We do know that low-efficiency filters (e.g., less than MERV 8 according to ASHRAE Standard 52.2 or less than ePM2.5 20% according to ISO 16890-1:2016) are very unlikely to make a difference. Properly installed higher efficiency filters can remove particles of a relevant size depending on their installed capture efficiency, but current information does not allow for specific recommendations.
Why shouldn’t I just use the highest-efficiency filter that I can find?
High-efficiency filters may be appropriate for your building, but they can also be counterproductive. A high-efficiency filter may have a high initial pressure drop and/or load with dust and particles very quickly, thus requiring frequent filter changes. A high-pressure drop filter (either because it is that way when it is new or because it loads quickly) can also cause more air to bypass the filter if it is not properly installed and well-sealed. Depending on the design of your system, a high-pressure drop filter can also diminish the amount of air supplied into the environment, making the filter less effective as well as causing other problems with other parts of the HVAC system. Most importantly, in many residential and some light commercial systems, the fan in the system does not run very often and the efficiency of the filter may not be as important as it could be.
I know that hospitals have good filtration, why don’t we all just use systems like these?
Hospitals (and many healthcare facilities) have specially designed mechanical systems that can accommodate the levels of filtration that they need. They often rely on other systems and control strategies (e.g., UV lamps, humidity control, airflow management) to maximize the benefit from filtration. Most importantly, they have dedicated staff who operate and maintain this equipment so that it provides maximal benefit.
What about ultraviolet (UV) lamps, do they work?
A properly designed and maintained UV system, often in concert with filtration, humidity control, and airflow management, has been shown to reduce infections from other viruses. The details of the system are very important (e.g., design of fixtures, lamp type, lamp placement airflow amount and mixing, etc.). Simply adding UV to an existing system without consideration of these factors has not been demonstrated to have a benefit.
What about ionizers, ozone generators, plasma, and other air cleaning technologies?
None of these technologies have been proven to reduce infection in real buildings, even if they have promise based on tests in a laboratory or idealized setting. Some of them have substantial concerns about secondary issues (such as ozone production).
What about portable air cleaners?
Similar to building filtration, here is no direct clinical evidence of the benefit of portable air cleaners for reducing infectious disease risk, but some benefit can be reasonably inferred for appropriately sized (e.g., their removal rate is appropriate for the room), maintained, and operated portable HEPA filters. As with building filtration, the details are important (e.g., efficiency and airflow rate of the air cleaner, sizing and placement within the space, maintenance and filter change, nature of space that is being cleaned) and appropriate portable filtration is only likely to be effective in concert with other measures.
Doesn’t filtration require that the droplets that cause COVID-19 be airborne? I have heard that it is large droplets.
Yes, most public health guidance suggests that COVID-19 transmission is predominantly associated with large droplets. This is why air filtration is only a small part of a solution as it does not generally address transmission from surface contact or from close contact between individuals. However, the distinction between droplet and airborne is particle size. We know that a) droplets can stay airborne for long periods of time (e.g., hours under some conditions) b) droplets change in size based on a number of factors including their composition and the relative humidity of the air around them (low relative humidity will generally cause droplets and particles to become smaller). Further, DNA and RNA from other viruses that are generally associated with droplets have been found on used filters.
What precautions should I take when changing filters?
In general, it is wise to assume that filters have active microbiological material on them. Whether this represents an important infectious disease risk from viruses is not known, but the precautionary principle would suggest that care should be taken. This becomes particularly important in any building (including a home) where there are known or likely cases of any infectious disease including COVID-19 and also extends to portable air cleaner filters and vehicle cabin air filters. Filters should be changed with the system turned off, while wearing gloves, with respiratory protection if available, outdoors if possible, and disposed of in a sealed bag.
COVID-19 (Coronavirus) Resources for the Air Filtration Industry
Where can I go to get more information
The best place for all COVID-19 information is your local, regional, and national health authorities. More information specific to building systems can be found here:
Need guidance on getting back to work and preparing your buildings for re-entry amid COVID-19? Get help from BOMA: